Products under Components and Accessories
The precision W1 Waveguide adapters transform standard WR10 waveguide interfaces to precision coaxia...
The precision W1 Waveguide adapters transform standard WR10 waveguide interfaces to precision coaxia...
The 34 Series of precision adapters enable accurate measurements with W1 Connector® and V Connector®...
The 34 Series of precision adapters enable accurate measurements with W1 Connector® and V Connector®...
The 34 Series of precision adapters enable accurate measurements with W1 Connector® and V Connector®...
The 34 Series of precision adapters enable accurate measurements with W1 Connector and V Connector i...
Enhance reliability of microwave test setup with precision adapters. Rigid test connections for impr...
The 33 Series of precision adapters enable accurate measurements with V Connector interfaces. Every...
The 33 Series of precision adapters enable accurate measurements with K Connector interfaces. Every...
The 33 Series of precision adapters enable accurate measurements with K Connector interfaces. Every...
The 33 Series of precision adapters enable accurate measurements with K Connector® interfaces. Every...
The K230 Series is the panel-mount version of the K220 Series Adapters. These units mount in a stand...
The K224B precision adapter enables accurate measurements with K Connectors. Fully specified and 100...
The K222B precision adapter enables accurate measurements with K connectors. Each one is fully speci...
The precision, metrology-grade terminations are used in measurement systems that need to achieve the...
The precision, metrology-grade terminations are used in measurement systems that need to achieve the...
Anritsu attenuators define the standard for fixed attenuator performance and reliability. Attenuator...
W1 Precision Metrology-grade terminations are used in measurement systems that need to achieve the s...
Precision Metrology-grade terminations are used in measurement systems that need to achieve the smal...
These precision, metrology-grade terminations are used in measurement systems that need to achieve t...
These precision, metrology-grade terminations are used in measurement systems that need to achieve t...
These precision, metrology-grade terminations are used in measurement systems that need to achieve t...
These precision, metrology-grade terminations are used in measurement systems that need to achieve t...
These precision, metrology-grade terminations are used in measurement systems that need to achieve t...
This Low PIM Load contains a 7-16 DIN male connector on one end and a 7-16 DIN female connector on t...
This drill and tap set is used to precisely machine the concentric holes needed for mounting K Conne...
The 01-107M is used with the K101M and the K101M-85In-line Male cable connectors.
The 01-504 W1 torque wrench is one of three tools that make connecting, disconnecting, and installat...
The 01-505 open-end wrench is a tool used to fasten one side of a mated W1 connectors. This tool wor...
The Anritsu 01‑506 is a fixed break‑over torque wrench designed for W1 (1 mm) connectors, featuring...
The K101F-R female cable connector is designed to install on K118 3 mm (0.118 inch) semi-rigid cable...
The K101M-085-R K male in-line cable connector is designed to install on V085 2.16 mm (0.085 inch) s...
The K101M-R K male in-line cable connector is designed to install on K118 3 mm (0.118 inch) semi-rig...
The K102F-R mates with either the K100 Bead or the K100B Hermetic Bead.
The K102M-R mates with either the K100 Bead or the K100B Hermetic Bead.
The K103F-R mates with either the K100 Bead or the K100B Hermetic Bead.
The K103M-R mates with either the K100 Bead or the K100B Hermetic Bead.
The K104F-R mates with either the K100 Bead or the K100B Hermetic Bead.
The K104M-R mates with either the K100 Bead or the K100B Hermetic Bead.
K110-1-R is designed to connect to a 0.15 mm or larger, microstrip trace on Alumina. The installatio...
K110-2-R is designed to connect to a 0.41 mm or larger, trace on stripline. The installation note fo...
K110-3-R is designed to use with a 0.41 mm or larger, microstrip trace on Duroid. The installation n...
K118 is a 1.5 meter length of 3.00 mm (0.118 inches) semi-rigid coaxial cable for use with K101F and...
V085 is a 1.5 meter length of 2.18 mm (0.085 inches) semi-rigid coaxial cable for use with the V101F...
The V101F-R is RoHS compliant. It contains less than the Maximum Concentration Values (MCVs) for Lea...
The V101M-R is RoHS compliant. It contains less than the Maximum Concentration Values (MCVs) for Lea...
The W1-101M male cable connector is designed to be installed on a UT-47 semi-rigid cable and provide...
The W1 Connector has an air dielectric interface similar to K and V connectors.
The W1 Connector has an air dielectric interface similar to K and V connectors.
The W1 two-hole Flange female W1 connector center conductor is supported by a PPO bead on the front...
The W1 Connector launcher family includes both Male (W1-105M) and Female screw-in type connectors.
The W1 Connector launcher family includes both Male and Female screw-in type connectors.
The 01-309 is a tool designed to make it easy to correctly cut the ends of the V085 semi-rigid coaxi...
This drill and tap set is used to precisely machine the concentric holes needed for mounting V Conne...
These fixtures are designed to help you successfully install V101F and V101M cable connectors on V08...
These fixtures are designed to help you successfully install V101F and V101M cable connectors on V08...
This drill and tap set is used to precisely machine the concentric holes needed for mounting V Conne...
01-303 Soldering Fixture for sparkplug launcher glass beads. This tool is used to insert the V100 or...
The 01-301 Evaluation Kit is designed to help engineers evaluate and assemble Anritsu V connectors,...
For use with the standard SMA, 3.5 mm, and 2.4 mm connectors, along with K Connectors, and V Connect...
The 01-203 is an all purpose torque wrench for NMD connectors. NMD connectors are synonymous with ru...
Torque wrench for SMA 3.5mm, K Connector (2.92 mm) and V Connector (1.85 mm) connectors. The 01-201...
The 01-118 K Connector® Assembling Fixture Kit is a multi-purpose tool used to measure the center co...
This drill and tap set is used to precisely machine the concentric holes needed for mounting K Conne...
Cable Sleeve Soldering Fixtures, come in packages of 10. 01-107F is used with the K101F In-line Fema...
This kit includes the tools needed to tighten the K102F, K102M, V102F and V102M sparkplug connectors...
Soldering Fixture for sparkplug launcher glass beads, package of 10. This tool is used to insert the...
This kit contains one K120 25 cm Male/Male Cable Assembly, two K102F Female Sparkplug Launcher Conne...
The 2000-1544-R is a RS-232-Bootload cable for use with Anritsu Power Meters.
The 800-441 Serial Interface Cable is a high-quality null-modem RS-232 cable designed to connect Anr...
The Anritsu 3-1010-124 is a high-power, fixed 40 dB RF attenuator designed to reduce signal levels i...
The Anritsu 3-1010-123 is a 30 dB fixed attenuator designed to reduce RF signal levels while maintai...
The Anritsu 3-1010-122 is a bi-directional fixed RF attenuator designed to reliably reduce signal po...
The 42N50A-30 coaxial fixed attenuator provides 30 dB attenuation and a 50 watt power rating for hig...
The Anritsu 42N50-20 is a 20 dB fixed RF attenuator engineered for reliable signal attenuation while...
The Anritsu 1010-128-R is a high-power, fixed 40 dB RF attenuator designed to reliably reduce signal...
The Anritsu 1010-127-R is a robust fixed attenuator engineered to deliver a precise 30 dB signal red...
The Anritsu 2000-1618-R is a high-precision Open, Short, Load (OSL) calibration kit specially design...
The Anritsu Calibration kits contain all the precision components and tools required to calibrate yo...
The Anritsu 3656 W1 Calibration/Verification Kit is designed for high-accuracy calibration of Vector...
The V265 and W265 DC Blocks have been designed and optimized for optical communications and other hi...
The Gen II Ultra Wideband Bias Tee is designed to meet the high electrical performance requirement o...
Kelvin connection bias tee is designed for applications where both DC and RF signals are applied to...
The MA25100A RF Power Indicator is always on and always ready. Its self-contained battery can last f...
The MA25200A high power protection module safeguards the S412E ports from high power portable, mobil...
This horn antenna is specifically designed for over-the-air (OTA) and testing measurements for the m...
The 2000-1030-R is a portable half-wave whip antenna designed for portable or field use, especially...
The Anritsu 2000-1031-R is a compact, half-wave whip portable antenna engineered for robust field us...
The Anritsu 2000-1032-R is a half-wave whip antenna with a knuckle elbow design, optimized for porta...
The Anritsu 2000-1035-R is a 5/8-wave whip portable antenna engineered for compact field use. It’s a...
The Anritsu 2000-1200-R is a compact quarter-wave whip antenna built for portable use with handheld...
The Anritsu 2000-1361-R is a half-wave thin-blade style antenna with a convenient knuckle elbow desi...
The 2000-1411-R is a rugged, high-performance portable Yagi antenna, designed for directional signal...
The Anritsu 2000-1412-R is a high-performance portable Yagi antenna designed for rugged use. Featuri...
The Anritsu 2000-1413-R is a portable Yagi directional antenna tailored for field use, offering focu...
The Anritsu 2000-1414-R is a high-performance portable Yagi directional antenna tailored for field u...
The Anritsu 2000-1415-R is a high-performance portable Yagi directional antenna engineered for the 2...
The Anritsu 2000-1416-R is a high-performance portable Yagi directional antenna, optimized for accur...
The Anritsu 2000-1473-R is a half-wave, 90° adjustable whip antenna featuring a knuckle elbow design...
The Anritsu 2000-1474-R Portable Antenna
The 2000-1475-R a compact and lightweight portable antenna designed for easy deployment in various f...
Magnet Mount GNSS Antenna (active 3-5V) with SMA connector and 3 m (9.8 ft) extension cable (Require...
The Antenna Kit 2000-1636-R is a portable, multi-band antenna set designed for versatile RF applicat...
The Anritsu 2000-1645-R is a magnetic-mount, multiband broadband antenna, ideal for quick, temporary...
The Anritsu 2000-1646-R is a magnetic-mount broadband antenna designed for versatile field use. It o...
The Anritsu 2000-1647-R is a multi-band broadband antenna with a secure magnetic mount—ideal for mob...
Mag Mount Broadband Antenna – 2000-1648-R a compact and durable magnetic-mount broadband antenna des...
Magnet Mount GPS Antenna 2000-1652-R a high-performance GPS antenna with a strong magnetic mount, de...
The 2000-1659-R is a high-performance portable Yagi antenna crafted for field use. Operating in the...
The 2000-1660-R is a high-performance portable Yagi antenna, purpose-built for directional signal tr...
The 2000-2141-R is a true ultrawideband omnidirectional antenna designed to cover an exceptionally b...
The 2000-1726-R is a robust, high-gain portable Yagi antenna, meticulously crafted for directional s...
The Anritsu 2000-2107-R is a versatile log-periodic directional antenna, engineered for ultra-wideba...
The 2000-1748-R is a high-performance log-periodic directional antenna spanning an exceptionally wid...
The 2000-1751-R is a rugged, field-ready LTE dipole antenna featuring a sleek thin-blade design with...
In order to conduct EMF measurements, an Anritsu isotropic antenna is required. Anritsu offers the 2...
In order to conduct EMF measurements, an Anritsu isotropic antenna is required. Anritsu offers the 2...
In order to conduct EMF measurements, an Anritsu isotropic antenna is required. Anritsu offers the 2...
The Anritsu 2000-1812-R is a compact, high-performance directional Yagi antenna ideal for field depl...
The Portable Yagi Antenna is designed for reliable, high-gain performance in the 380 MHz to 430 MHz...
Multiband dipole omni directional antenna covering all the common cellular bands in a single antenna...
PIM Hunter is a patent-pending technology that allows a test technician to pinpoint the location of...
The 806-42x-R series of Flexible Phase Stable Cables are flexible, RoHS compliant cables. These cabl...
The 806-396-R is an ultra low loss flexible cable assembly with V(m) to V(f) connector interfaces, f...
The 806-304-R is an ultra low loss cable assembly designed for rugged and outdoor applications. This...
The 806-209-R is a flexible, RoHS compliant cable with V(m) to V(f) connector interfaces, frequency...
The 806-206-R is a flexible, RoHS compliant cable with V(m) to V(f) connector interfaces, frequency...
The SmartCal MN25418A is a series of 4-port auto calibration units covering a frequency range from 3...
The SmartCal MN25408A is a 4-port auto calibration unit covering a frequency range from 300 kHz to 8...
The SmartCal MN25218A is a series of 2-port auto calibration units covering a frequency range from 3...
The SmartCal MN25208A is a series of 2-port auto calibration units covering a frequency range from 3...
The MN25110A is scalable, allowing users access to broadband measurements through E, V and W band.
ICN50 provides improved frequency coverage and accuracy performance. It is compatible with Site Mast...
The MN4765B is a characterized, unamplified photodiode module. It is used as an optical receiver wit...
The 510-97-R is a precision RF adapter that connects two female 7/16 DIN connectors. It enables seam...
The 510-96-R is a precision RF adapter that connects two 7/16 DIN male connectors. It is designed fo...
The 510-93-R is a precision RF adapter designed to transition between a 7/16 DIN male connector and...
The 510-92-R is a robust RF adapter designed for seamless connection between a 7/16 DIN male connect...
The 510-91-R is an RF-grade adapter crafted to interface between a 7/16 DIN female connector and an...
The Anritsu 510-90-R is a non-precision RF adapter designed primarily for use with handheld test ins...
The Anritsu 1091-467-R is a high-performance RF adapter that interfaces a 4.3-10 male connector to a...
The Anritsu 1091-465-R is a robust and reliable RF adapter designed for seamless interface between a...
The Anritsu 1091-172-R is a non-precision RF adapter designed to bridge an N-type male connector to...
The Anritsu 1091-81-R is a precision RF adapter that converts an SMA female connector to an N-type f...
The Anritsu 1091-80-R is a high-performance RF adapter featuring a female Type N connector (N f) to...
The 1091-27-R is a versatile RF adapter that converts a Type-N male connector to an SMA female conne...
The 1091-26-R is a precision RF adapter designed to convert an N-type male (N-m) connector to an SMA...
The 2000-1810-R is a portable, small form factor design USB to Ethernet LAN adapter. It provides 10/...
The Anritsu 806-141-R is a 12 V DC automotive power adapter that plugs into a vehicle's cigarette li...
The 760-243-R is a rugged transit case designed for securely transporting Anritsu handheld instrumen...
The 760-235 Transit Case is a compact, rugged storage solution designed specifically for select Anri...